The Rice Alliance for Technology and Entrepreneurship handed out awards to the founders of the most promising companies that pitched. Photo courtesy of Slyworks Photography/Rice Alliance

Nearly 100 energy tech startups pitched at the 19th annual Rice Alliance Energy Tech Venture Forum this week — and over a third of those companies are based in the Houston area.

At the conclusion of the event — which took place on Thursday, September 15, at Rice University, and included a day full of company pitches, panels, and thought leadership — 10 startups were deemed the most promising among their peers. The group was voted on by investors attending office hours ahead of the event.

The Rice Alliance for Technology and Entrepreneurship facilitated nearly 700 meetings between 70 investor groups and 90 ventures, according to the organization. The group of presenting companies included participants from Rice's Clean Energy Accelerator's first two cohorts.

Here are 10 of the energy tech industry's most promising companies — and the technology they are working on that's set to disrupt the status quo.

Arolytics

Based in Calgary and founded in 2018, Arolytics is a software company that specializes in emissions management, ESG performance, and regulatory compliance. The company's platform is able to save its users up to 40 percent of their associated measurement costs and emissions management.

Atargis Energy

Atargis Energy is based in Pueblo, Colorado, and is a a member of Rice's second cohort of its Clean Energy Accelerator. The company has developed a twin hydrofoil-based wave energy converter that creates electric power from ocean waves. The technology is paired with real-time sensors and machine learning to optimize power conversion.

Compact Membrane Systems

Based in Delaware, Compact Membrane Systems, is pioneering membrane systems for decarbonizing hard-to-abate chemical manufacturing and industrial carbon capturing. The technology has the potential to revolutionize the chemicals industry.

Dimensional Energy

Dimensional Energy, based in Ithaca, New York, is transforming carbon dioxide into sustainable aviation fuels and products at market competitive prices. The technology integrates carbon capture, electrolysis, and Fischer Tropsch synthesis.

Kanin Energy

Headquartered in Houston, Kanin Energy works with heavy Industry to turn their waste heat into a clean baseload power source. The platform also provides tools such as project development, financing, and operations.

Orbital Sidekick

Orbital Sidekick, based in San Francisco, is an intelligence and analytics company that specializes in remote detection of environmental hazards by way of hyperspectral satellites. The technology provides actionable insights for its customers.

Power to Hydrogen

Based in Columbus, Ohio, Power to Hydrogen has developed an AEM-based electrolysis technology that produces high pressure, high efficiency hydrogen at low cost via water and renewable energy.

Quino Energy

Another Clean Energy Accelerator Class 2 member, Quino Energy produces flow battery systems with over eight hours of energy storage. The batteries are cheaper than lithium-ion alternatives, as well as being safer and easier to scale.

STARS Technology

Based in Richland, Washington, STARS Technology Corp. is commercializing advanced micro-channel chemical process technology that originally was designed for NASA and the Department of Energy. The company's reactors and heat exchangers are compact, energy-efficient, and more.

Syzygy Plasmonics

Houston-based Syzygy Plasmonics is commercializing its light-reacting energy, which would greatly reduce carbon emissions in the chemical industry. The technology originated out of Rice University.

Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

New Houston venture studio emerges to target early-stage hardtech, energy transition startups

funding the future

The way Doug Lee looks at it, there are two areas within the energy transition attracting capital. With his new venture studio, he hopes to target an often overlooked area that's critical for driving forward net-zero goals.

Lee describes investment activity taking place in the digital and software world — early stage technology that's looking to make the industry smarter. But, on the other end of the spectrum, investment activity can be found on massive infrastructure projects.

While both areas need funding, Lee has started his new venture studio, Flathead Forge, to target early-stage hardtech technologies.

“We are really getting at the early stage companies that are trying to develop technologies at the intersection of legacy industries that we believe can become more sustainable and the energy transition — where we are going. It’s not an ‘if’ or ‘or’ — we believe these things intersect,” he tells EnergyCapital.

Specifically, Lee's expertise is within the water and industrial gas space. For around 15 years, he's made investments in this area, which he describes as crucial to the energy transition.

“Almost every energy transition technology that you can point to has some critical dependency on water or gas,” he says. “We believe that if we don’t solve for those things, the other projects won’t survive.”

Lee, and his brother, Dave, are evolving their family office to adopt a venture studio model. They also sold off Azoto Energy, a Canadian oilfield nitrogen cryogenic services business, in December.

“We ourselves are going through a transition like our energy is going through a transition,” he says. “We are transitioning into a single family office into a venture studio. By doing so, we want to focus all of our access and resources into this focus.”

At this point, Flathead Forge has seven portfolio companies and around 15 corporations they are working with to identify their needs and potential opportunities. Lee says he's gearing up to secure a $100 million fund.

Flathead also has 40 advisers and mentors, which Lee calls sherpas — a nod to the Flathead Valley region in Montana, which inspired the firm's name.

“We’re going to help you carry up, we’re going to tie ourselves to the same rope as you, and if you fall off the mountain, we’re falling off with you,” Lee says of his hands-on approach, which he says sets Flathead apart from other studios.

Another thing that's differentiating Flathead Forge from its competition — it's dedication to giving back.

“We’ve set aside a quarter of our carried interest for scholarships and grants,” Lee says.

The funds will go to scholarships for future engineers interested in the energy transition, as well as grants for researchers studying high-potential technologies.

“We’re putting our own money where our mouth is,” Lee says of his thesis for Flathead Forge.

------

This article originally ran on EnergyCapital.

Houston-based lunar mission's rocky landing and what it means for America's return to the moon

houston, we have a problem

A private U.S. lunar lander tipped over at touchdown and ended up on its side near the moon’s south pole, hampering communications, company officials said Friday.

Intuitive Machines initially believed its six-footed lander, Odysseus, was upright after Thursday's touchdown. But CEO Steve Altemus said Friday the craft “caught a foot in the surface," falling onto its side and, quite possibly, leaning against a rock. He said it was coming in too fast and may have snapped a leg.

“So far, we have quite a bit of operational capability even though we’re tipped over," he told reporters.

But some antennas were pointed toward the surface, limiting flight controllers' ability to get data down, Altemus said. The antennas were stationed high on the 14-foot (4.3-meter) lander to facilitate communications at the hilly, cratered and shadowed south polar region.

Odysseus — the first U.S. lander in more than 50 years — is thought to be within a few miles (kilometers) of its intended landing site near the Malapert A crater, less than 200 miles (300 kilometers) from the south pole. NASA, the main customer, wanted to get as close as possible to the pole to scout out the area before astronauts show up later this decade.

NASA's Lunar Reconnaissance Orbiter will attempt to pinpoint the lander's location, as it flies overhead this weekend.

With Thursday’s touchdown, Intuitive Machines became the first private business to pull off a moon landing, a feat previously achieved by only five countries. Japan was the latest country to score a landing, but its lander also ended up on its side last month.

Odysseus' mission was sponsored in large part by NASA, whose experiments were on board. NASA paid $118 million for the delivery under a program meant to jump-start the lunar economy.

One of the NASA experiments was pressed into service when the lander's navigation system did not kick in. Intuitive Machines caught the problem in advance when it tried to use its lasers to improve the lander's orbit. Otherwise, flight controllers would not have discovered the failure until it was too late, just five minutes before touchdown.

“Serendipity is absolutely the right word,” mission director Tim Crain said.

It turns out that a switch was not flipped before flight, preventing the system's activation in space.

Launched last week from Florida, Odysseus took an extra lap around the moon Thursday to allow time for the last-minute switch to NASA's laser system, which saved the day, officials noted.

Another experiment, a cube with four cameras, was supposed to pop off 30 seconds before touchdown to capture pictures of Odysseus’ landing. But Embry-Riddle Aeronautical University’s EagleCam was deliberately powered off during the final descent because of the navigation switch and stayed attached to the lander.

Embry-Riddle's Troy Henderson said his team will try to release EagleCam in the coming days, so it can photograph the lander from roughly 26 feet (8 meters) away.

"Getting that final picture of the lander on the surface is still an incredibly important task for us,” Henderson told The Associated Press.

Intuitive Machines anticipates just another week of operations on the moon for the solar-powered lander — nine or 10 days at most — before lunar nightfall hits.

The company was the second business to aim for the moon under NASA's commercial lunar services program. Last month, Pittsburgh's Astrobotic Technology gave it a shot, but a fuel leak on the lander cut the mission short and the craft ended up crashing back to Earth.

Until Thursday, the U.S. had not landed on the moon since Apollo 17's Gene Cernan and Harrison Schmitt closed out NASA's famed moon-landing program in December 1972. NASA's new effort to return astronauts to the moon is named Artemis after Apollo's mythological twin sister. The first Artemis crew landing is planned for 2026 at the earliest.

3 female Houston innovators to know this week

who's who

Editor's note: Welcome to another Monday edition of Innovators to Know. Today I'm introducing you to three Houstonians to read up about — three individuals behind recent innovation and startup news stories in Houston as reported by InnovationMap. Learn more about them and their recent news below by clicking on each article.

Emma Konet, co-founder and CTO of Tierra Climate

Emma Konet, co-founder and CTO of Tierra Climate, joins the Houston Innovators Podcast. Photo via LinkedIn

If the energy transition is going to be successful, the energy storage space needs to be equipped to support both the increased volume of energy needed and new energies. And Emma Konet and her software company, Tierra Climate, are targeting one part of the equation: the market.

"To me, it's very clear that we need to build a lot of energy storage in order to transition the grid," Konet says on the Houston Innovators Podcast. "The problems that I saw were really on the market side of things." Read more.

Cindy Taff, CEO of Sage Geosystems

Houston-based Sage Geosystems announced the first close of $17 million round led by Chesapeake Energy Corp. Photo courtesy of Sage

A Houston geothermal startup has announced the close of its series A round of funding.

Houston-based Sage Geosystems announced the first close of $17 million round led by Chesapeake Energy Corp. The proceeds aim to fund its first commercial geopressured geothermal system facility, which will be built in Texas in Q4 of 2024. According to the company, the facility will be the first of its kind.

“The first close of our Series A funding and our commercial facility are significant milestones in our mission to make geopressured geothermal system technologies a reality,” Cindy Taff, CEO of Sage Geosystems, says. Read more.

Clemmie Martin, chief of staff at The Cannon

With seven locations across the Houston area, The Cannon's digital technology allows its members a streamlined connection. Photo courtesy of The Cannon

After collaborating over the years, The Cannon has acquired a Houston startup's digital platform technology to become a "physical-digital hybrid" community.

Village Insights, a Houston startup, worked with The Cannon to create and launch its digital community platform Cannon Connect. Now, The Cannon has officially acquired the business. The terms of the deal were not disclosed.

“The integration of a world-class onsite member experience and Cannon Connect’s superior virtual resource network creates a seamless, streamlined environment for member organizations,” Clemmie Martin, The Cannon’s newly appointed chief of staff, says in the release. “Cannon Connect and this acquisition have paved new pathways to access and success for all.” Read more.