First large-scale affordable housing project of 3D-printed homes rises in Houston

Building Blocks

Zuri Gardens is taking shape near Hobby Airport. Courtesy rendering

What’s being promoted as the world’s first large-scale affordable housing development built using 3D technology is taking shape in Houston.

Houston-based 3D construction company HiveASMBLD has teamed up with Houston-based Cole Klein Builders and the City of Houston on the Zuri Gardens project. Located near Hobby Airport on Martindale Road, the first 3D-printed home at Zuri Gardens is set to be completed in October.

“Zuri Gardens was born from the frustration of watching hardworking families get priced out of safe, resilient housing. We knew there had to be a better way — and with this project, we’re proving that there is,” says Vanessa Cole, co-founder of Cole Klein Builders.

“By combining visionary design, advanced construction technology, and powerful partnerships, we’re building more than just homes — we’re creating a blueprint for the future of equitable homeownership in Houston and beyond.”

The development is being created for households earning up to 120 percent of the median income in the Houston metro area. For a four-member household in the Houston area, the 120 percent limit in 2025 is $121,300, as set by the U.S. Department of Housing and Urban Development (HUD).

The 13-acre Zuri Gardens development will feature 80 energy-efficient homes averaging 1,360 square feet. Prices will be in the mid to high $200s. The homes will qualify for up to $125,000 in down payment assistance from the City of Houston.

HiveASMBLD will print two different home designs, each with two-bedroom and two-and-a-half bathroom configurations, along with an office/flex space and a covered patio.

Zuri Gardens home model Houston Courtesy rendering

“The community we envision for Zuri Gardens is modern, safe, and one that residents will be proud to call home. When completed using HiveASMBLD’s innovative technology, this 3D-printed multifamily community will exemplify the future of residential affordable living,” says Timothy Lankau, founder and co-CEO of HiveASMBLD.

Developments like Zuri Gardens are popping up around the country.

“3D-printed homes are revolutionizing the construction industry by making home builds faster, cheaper, and more sustainable,” according to The Zebra, an Austin-based insurance marketplace. “In less than 24 hours, 3D printers can print the foundation and walls for a small home at a fraction of the cost of typical construction.”

U.S. News & World Report explains that unlike a traditional home, a 3D-printed home is printed in place, “just like you’d print a knickknack on your home 3D printer. Layer by layer, proprietary concrete blends are used to build the wall systems of the home in any type of design that a builder can imagine.”

Texas is home to several trailblazing 3D-printed projects.

In the U.S., the first 3D-printed home was built in 2018 in Austin, and the first 3D-printed multistory home was completed in 2023 in Harris County’s Spring Branch neighborhood. Meanwhile, the world’s largest neighborhood of 3D-printed homes is located in the Austin suburb of Georgetown.

Grand View Research predicts the global market for 3D-printed construction will approach $4.2 billion by 2030.

---

This article originally appeared on CultureMap.com.

Marcelo Cordini, co-founder of December Labs, joins the Houston Innovators Podcast to discuss the unique service his company provides an evolving tech workforce. Photo courtesy of December Labs

Houston company is connecting rockstar developers with growing startups and big corporations

HOUSTON INNOVATORS PODCAST EPISODE 53

For tech startups, a great business idea is step one, design and development is that next, make-or-break step. A Houston company exists to help staff development teams with talented specialists across various fields.

December Labs, which has offices in Uruguay and Houston, has seen the industry evolve since its founding in 2014. Nowadays, it's a competition for startups and corporations alike to get the best tech teams.

"Developers are kind of rockstars nowadays — it's very hard to attract them and keep them happy. We can help with that," says Marcelo Cordini, co-founder of December Labs, on this week's episode of the Houston Innovators Podcast.

Cordini and his co-founders — Martin Palatnik, Diego San Esteban, and Washington Miranda — designed their business's service to provide development teams to companies of all sizes and industries, from startups to big companies.

"We are always learning new technologies — that's our focus," Cordini says. "If you have a big company focused on real estate, your focus is on real estate — not technology. So, if you partner with a company like us, it will give you that value to have someone who knows how to hire developers and how to train them."

Similar to most companies, the pandemic posed its challenges to December Labs, but one thing that the company has going for it is the evolution of the workforce. Now, it's way less important to have your team in house, as Cordini explains.

"It's the same to have your developers in South America as having them in the U.S., right? Because we are all working from home," he says. "We were lucky and prepared [for the pandemic]."

You can listen to the full interview with Cordini below — or wherever you stream your podcasts — and subscribe for weekly episodes.

Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

Property Showcase

UH breakthrough moves superconductivity closer to real-world use

Energy Breakthrough

University of Houston researchers have set a new benchmark in the field of superconductivity.

Researchers from the UH physics department and the Texas Center for Superconductivity (TcSUH) have broken the transition temperature record for superconductivity at ambient pressure. The accomplishment could lead to more efficient ways to generate, transmit and store energy, which researchers believe could improve power grids, medical technologies and energy systems by enabling electricity to flow without resistance, according to a release from UH.

To break the record, UH researchers achieved a transition temperature 151 Kelvin, which is the highest ever recorded at ambient pressure since the discovery of superconductivity in 1911.

The transition temperature represents the point just before a material becomes superconducting, where electricity can flow through it without resistance. Scientists have been working for decades to push transition temperature closer to room temperature, which would make superconducting technologies more practical and affordable.

Currently, most superconductors must be cooled to extremely low temperatures, making them more expensive and difficult to operate.

UH physicists Ching-Wu Chu and Liangzi Deng published the research in the Proceedings of the National Academy of Sciences earlier this month. It was funded by Intellectual Ventures and the state of Texas via TcSUH and other foundations. Chu, founding director and chief scientist at TcSUH, previously made the breakthrough discovery that the material YBCO reaches superconductivity at minus 93 K in 1987. This helped begin a global competition to develop high-temperature superconductors.

“Transmitting electricity in the grid loses about 8% of the electricity,” Chu, who’s also a professor of physics at UH and the paper’s senior author, said in a news release. “If we conserve that energy, that’s billions of dollars of savings and it also saves us lots of effort and reduces environmental impacts.”

Chu and his team used a technique known as pressure quenching, which has been adapted from techniques used to create diamonds. With pressure quenching, researchers first apply intense pressure to the material to enhance its superconducting properties and raise its transition temperature.

Next, researchers are targeting ambient-pressure, room-temperature superconductivity of around 300 K. In a companion PNAS paper, Chu and Deng point to pressure quenching as a promising approach to help bridge the gap between current results and that goal.

“Room-temperature superconductivity has been seen as a ‘holy grail’ by scientists for over a century,” Rohit Prasankumar, director of superconductivity research at Intellectual Ventures, said in the release. “The UH team’s result shows that this goal is closer than ever before. However, the distance between the new record set in this study and room temperature is still about 140 C. Closing this gap will require concerted, intentional efforts by the broader scientific community, including materials scientists, chemists, and engineers, as well as physicists.”

---

This article originally appeared on EnergyCapitalHTX.com.

Rice University to lead AI conferences in Paris this spring and summer

where to be

Houston’s own Rice University will host a series of conferences on artificial intelligence in Paris, France, starting this month. The series will tackle the impact and possibilities of AI in fields like econometrics and online privacy security.

“Artificial intelligence is transforming the global economy and raising profound questions about how technology intersects with society,” Caroline Levander, Rice’s vice president for global strategy, said in a news release. “By convening scholars from multiple disciplines and countries in Paris, Rice is helping shape the international conversation about how AI should be developed, governed and used.”

The four conferences in Paris aim for a multi-disciplinary approach that tackles aspects of AI from diverging angles. The conferences come as part of Rice’s increased partnership with French researchers at the Université Paris Sciences & Lettres. The two institutions have formed a binary star system of academic sharing and support.

“Paris has quickly become one of the most important global hubs for artificial intelligence research, entrepreneurship and policy,” Levander said. “For Rice, having a presence in the city allows our scholars to engage directly with that ecosystem while building collaborations that connect Europe and the United States around the future of AI.”

The conferences will be held at the Rice Global Paris Center. Topics scheduled are:

Emerging Topics in Operations Management: Platforms, Blockchains and AI

April 27-29

This conference will focus on how companies like Uber, Airbnb, Spotify, and DoorDash can use blockchain ledgers to deliver goods and services more transparently. It will also look at tokenized incentives, presumably forms of cryptocurrency and non-fungible tokens in the app space.

Econometrics and AI

May 5-7

This conference will explore how AI can be used in various economic statistical models and practices.

Human Flourishing in the Age of AI

June 3-5

This conference will be a collaboration between engineers and philosophers about the ethics and impact of AI on the lives of its users.

On the Crossroads of AI and Society: Incentives, Privacy and Fairness

July 15-16

This conference will consider how to stakeholders can ensure AI’s actions most benefit people, particularly in the fields of healthcare education, energy and public policy.

Houston claims 19% of Texas’ new live-work-play growth

by the numbers

In Texas, Houston is a big player in the live-work-play real estate movement.

A new 21-city analysis from coworking marketplace CoworkingCafe shows the Houston area added five live-work-play projects—mixed-use developments with residential, office and recreational components—over the past decade.

From 2016 to 2025, Houston accounted for 19 percent of Texas’ new live-work-play inventory, the analysis shows. Among the new local developments were Arrive Upper Kirby, St. Andrie, and The Laura:

  • Arrive Upper Kirby, which was sold in 2021 for $182 million, offers more than 61,000 square feet of retail and restaurant space adjacent to apartments and offices. The 13-story, 265,000-square-foot project was completed in 2017.
  • St. Andrie, a 32-acre, mixed-use community, was completed in 2019. The apartment-anchored development includes an H-E-B grocery store and 37,000 square feet of office space.
  • The Laura, spanning 110,000 square feet, was completed in 2023. Among the apartment complex’s amenities is a coworking space.

According to Northspyre, a software provider for real estate developers, live-work-play projects enable people to meet their needs, such as housing, workplaces, stores, restaurants, and recreation facilities, in a single place.

A total of 542 live-work-play developments opened between 2016 and 2025 in the 21 cities, with another 69 in the pipeline for 2026, CoworkingCafe says. Among major markets, New York City made up the largest share (119) of new live-work-play developments from 2016 to 2025.

The Houston area’s five projects were built in 2018, 2019, 2020, 2024, and 2025, CoworkingCafe data indicates, with another project scheduled for completion next year. The Greater Houston Partnership recently highlighted four mixed-use projects taking shape in the region, but only one of them is scheduled to be finished in 2027. It can take two to five years or more to complete a mixed-use development.

Of the five Houston developments finished in the past decade, 56 percent of the space went toward multifamily units, 29 percent toward offices, and 16 percent toward retail, CoworkingCafe says.

As noted by the Houston-Galveston Area Council, economic development in the 21st century “is about cultivating quality live-work-play environments that attract, retain, and grow a diverse and skilled population. Employers and businesses are increasingly choosing to make long-term investments in places that connect and engage people to strengthen economic competitiveness and promote innovation.”

With eight completed projects, Austin led construction of live-work-play developments in Texas from 2016 to 2025, according to CoworkingCafe. Dallas, which welcomed five live-work-play developments during that period, tied with Houston. San Antonio data wasn’t available.

View All Listings